Free shipping on all local order above $500
Advanced Color Management
BoxIO is an advanced color management device designed for both color critical post production environments and demanding on set color management applications.
BoxIO supports both 3D and 1D LUTs for unparalleled image control. BoxIO can be used for calibration, on set grading, and other LUT based operations.
Have a display that doesn't offer built-in 3D LUT based calibration? BoxIO interfaces directly with the industry's leading calibration software solutions for simple and accurate 3D LUT based display alignment.
Test Patch Generation
BoxIO is equipped with an integrated test pattern generator allowing for manual test patch generation from the BoxIO Utility or automated test pattern generation from calibration software like LightSpace or CalMAN*. Perform 3D LUT based calibration quickly and easily with BoxIO, a probe, and LightSpace or CalMAN.
Upload LUTs generated from LightSpace CMS and CalMAN software directly to BoxIO without exiting or running additional programs.
BoxIO supports real-time LUT updates over IP allowing for direct integration with popular on set color management tools like Pomfort's LiveGrade Pro, QTAKE’s Grade module, Filmlight's Prelight, and FireFly Cinema's FireDay and FirePlay.
BoxIO supports frame capture over IP allowing select applications including BoxIO Utility to grab reference still frames from incoming video signals.
Frames captured in BoxIO's own .RAW format can be displayed using Frame Callback. This feature has many potential uses including review of reference stills in on set environments, display of complex test patterns, and preview of new looks on previously captured content. Frames can be loaded quickly from a connected computer or directly from 16 available memory slots on BoxIO for even faster frame recall.
The BoxIO Utility provides useful toggles and controls for management of your BoxIO and can be used in conjunction with other applications from Zunzheng's software partners.
Quickly change mode and channel settings, load LUTs to BoxIO, toggle LUTs on and off instantly, update, manage BoxIO IP and WiFi settings, and capture frames at full resolution that can be saved instantly as a .JPG or .BMP
Waveform and Vectorscope transmitted directly from your BoxIO to your computer with no additional equipment needed. Simply connect your BoxIO and computer to the same network and use the ScopeStream utility.
BoxIO comes equipped with 1 x 3Gbps SDI inputs, 2 x clean SDI loop throughs, 2 processed SDI outputs, and 1 mini-DisplayPort output. The mini-DisplayPort output mirrors the processed SDI output allowing for LUT application on mini-DisplayPort as well as SDI outputs.
BoxIO can be used with consumer 4K and HDTVs using SDI to HDMI adapters such as the BMD Micro Converter for HD signal formats and the AJA HI5-4K for 4K signal formats.
Clean loop through SDI outputs mean BoxIO isn't limited to being an "end of chain" device. Both clean and processed SDI outputs cleanly pass incoming ancillary data.
All inputs and outputs offer full 12bit signal support.
Communicate with external devices over LAN and ad hoc WiFi.
BoxIO features a 4pin mini-xlr connector supporting 12V to 18V power and draws less than 10W of power.
BoxIO can operate in a single-channel mode with a switched input. This allows a single-channel at a time to be outputted on the two processed SDI outputs so that your signal can be distributed to two locations from a single BoxIO. In single-channel mode BoxIO supports 33x33x33 size 3D LUTs.
Two LUT Boxes In One.
BoxIO can apply two separate LUTs to two independent signals at the same time essentially operating as two LUT boxes in a single device. In dual-channel mode each channel supports 17x17x17 size 3D LUTs.
Store up to 16 33x33x33 size 3D LUTs and easily toggle between them.
Store up to 32 individual 17x17x17 size 3D LUTs (16 per channel) and easily toggle between them.
Internal Channel Stacking in dual-channel mode allows users to select Channel 2's output as the input for Channel 1. This capability has many potential applications including the ability to use a single device for both calibration and real-time look LUTs.
Use a single device for simultaneous use of Calibration and Look LUTs without having to rely on LUT concatenation while supporting both 1D and 3D LUTs at each step in the signal processing chain.*
*Channel Stacking requires firmware 0.1.26 or later and BoxIO Utility 0.17.1 or later.
BoxIO’s fan-less all aluminum design is durable, quiet, and built for 24/7 operation.
Up to 4 BoxIO units can be mounted in a single RU with available rack mount.
1x 12bit 3Gbps SDI
2x 12bit 3Gbps SDI
1x 12bit 3Gbps SDI Clean Loop Through
3D and 1D LUT support
33x33x33 and 17x17x17 sided LUTs
Ethernet & Ad Hoc WiFi
4pin mini-XLR 12~18V
Approx. 7W power consumption
Weight: 2.2lbs (998g)